• ...Loading...
Configure your pack
Trunks Intercom

Clear-Com RS-601 beltpack intercom + Headset

RS-601 is a single channel wired belt pack with a 4-pin male headset connector and a 3-pin loop/male intercom line connector.

Rental prices

  • 1 day
    24,00€
  • 2 days
    36,00€
  • 3 days
    48,00€
  • 4 days
    60,00€
  • 5 days
    72,00€
  • 6 days
    79,20€
  • 7 days
    86,40€

RS-601 is a single channel wired belt pack with a 4-pin male headset connector and a 3-pin loop/male intercom line connector. It has a 2.5mm AUX headphone jack and an RS-232 data jack for programming. It can be programmed using the V-pack software, which does not require opening the beltpack or changing any switches etc.

  • Clear-Com RS-601 Intercom Beltpack
  • Handset
  • Suitcase

Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and shortcircuit protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB
Microphone Pre-Amplifier
Headset Mic Impedance: 200 ohms
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
Headphone Amplifier
Load Impedance: 50 – 2,000 ohms
Output Level: +17 dBv before clipping
Distortion: <0.1% THD @ 1 kHz
Gain, line to output: +34 dB
Frequency Response: 100 Hz – 18 kHz, ±2dB
Connectors
Intercom Line: (2) 3-pin XLR–M–F
Headset: 4-pin XLR–M
Power Requirements
RS-601 26mA quiescent

30mA average talk

50mA talk with signaling

DC Voltage Range: 12-32 volts
Environmental
Operating Temp. Range: 0°C – 70°C (32°F – 158° F)
Humidity: 0 – 90% relative humidity
Dimensions 4.58″H x 3.73″W x 1.34″D (116 x 95 x 34 mm)
Weight 7.3 oz. (0.20 kg)

More information about the Clear-Com RS-601 intercom beltpack + Headset through our contact channels.