• ...Loading...
Configure your pack
Multiview

Blackmagic Multiview 16

Blackmagic MultiView models are the first equipment available on the market that allow independent SDI sources to be monitored on the same screen.

Rental prices

  • 1 day
    60,00€
  • 2 days
    90,00€
  • 3 days
    120,00€
  • 4 days
    150,00€
  • 5 days
    180,00€
  • 6 days
    198,00€
  • 7 days
    216,00€

The Blackmagic Design MultiView 16 features sixteen 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of the high resolution displays to view each source with increased clarity. The MultiView 16 allows for 4, 9, or 19 views to be selected, with each input fully re-synchronized. Two HD-SDI, two 6G-SDI, and one HDMI multi-view outputs are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.

Housed in a 1RU machined aluminum frame, the MultiView 16 is ready for use in the studio, broadcast truck, or even on location. It can be controlled using the illuminated buttons, spin knob, and 1.5″ LCD screen on the front panel, or with the included control software via the Ethernet port. A SOLO button lets instantly full screen a single source. For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240VAC.

  • Blackmagic Multiview 16
  • Power cable
  • Transport case

SDI video inputs

  • 16 x SD / HD / 6G (10-bit).

Derived SDI outputs

  • 16 x SD / HD / 6G (10-bit).

Multi View outputs

  • 4 x SDI (2 x HD / 2 x 6G), 1 x HDMI. They can be used simultaneously.

Multi View SDI outputs

  • 2 x HD (10 bit) and 2 x 6G (10 bit).

HDMI Multi View outputs

  • 1 x HDMI Type A. Recognizes the Monitor Identification Data (EDID).

Reference signal input

  • Black Burst and Tri-level Sync for SD / HD / 4K signals.

Supported definitions

  • SD / HD / 6G with automatic detection. Simultaneous display of SD / HD / 4K signals.

 

Updates

  • Through the high-speed USB 2.0 port (480 Mb / s) or an Ethernet network.

Control

  • 16 buttons for local control of the device. 5 buttons and rotary knob to control the screen or the RJ-45 Ethernet connection.

Setting

  • Using the front panel display. You need to use the RJ-45 connection or the USB 2.0 port to update the internal software or configure the IP address.

RS-422 control protocol

  • 1 input to configure the display mode.

Resynchronization

  • On all SDI outputs. Automatic switching between SD / HD / 6G signals.

For further information

Back